| Manufacture
| WILCO MACHINE & FAB
|
| Number Of Vessels
| 3 Pressure Vessels |
| Vessels Capacity
| 630 -ft3 x 3 ( Total = 1890 -ft3)
|
| Max. allowable working pressure
| 40 PSI (276 kpa)
|
| Working temperature
| 250° F (121° C) to -20° F (-29° C)
|
| Actual usable volume
| 622 -ft3
|
| PSV set @
| 36 psi
|
|
| 20 inch (508 mm) Wilco 50 psi(345 kPa) ASME Manways.
|
|
| 4" (101.6 mm) fill and vent and 5" (127.0 mm) discharge for standard units. 5" (127.0 mm)fill and vent optionally available & 5 inch (127.0 mm) cleanout nozzle with VictaulicR cap. |
| Power Unit: | Compressor producing approximately 200 ft3/min (5,66 m/min) at 30 psi(207 kPa) at 2000 rpm engine speed. |
| Power Unit:
| 3" (76.2 mm) auxiliary air inlet with 3" (76.2 mm) ball valves used to isolate power unit compressor.
|
| Power Unit:
| 30 gallon (114 liter) fuel tank & 30 gallon (114 liter) ASME air receiver
|
| Power Unit:
| 30-hp (22.4 kw) Gardner Denver APOG Compressor producing approximately 200 ft3/min (5,66 m/min)at 30 psi (207 kPa) at 2000 rpm engine speed.
|
| Trailer Frame:
| Steel I-Beam frame mounted with a single axle and air ride suspension.
|
| Trailer Frame:
| 25,000 lb (11,340 kg) axle with 71.5 inch (1.812 m) track
|
| Trailer Frame:
| The special under-frame support structure is designed to maintain structuralintegrity of the trailer in a variety of conditions. |
| Dimensions and Weights
| Dimensions and Weights
|
| Length
| 1569.5-in (47.0-ft, 5.5-in) (14.47-m)
|
| Width
| 102-in wide, (8-ft, 6-in) (2.59-m)
|
| Hight
| 160-in (13-ft, 4-in) (4.06-m).
|
| Total weight
| 37,100-lb (16,800-kg)
|
